Remodeling a kitchen in a residential home is a challenging task as there are many aspects that will need to be considered. One of the main features that is typically updated in any kitchen are the cabinets. The cabinets consist of the base units and the upper units. Installing the cabinets requires following steps to ensure the task is done the correct way.
The cabinets to install in a kitchen can be a DIY project or a task to be done by a professional. You will be able to determine which option to pursue based on the type of cabinets and the work involved. Most homeowners who are handy with DIY projects may choose to install the cabinet shells and hire cabinet installers or a finish carpenter to complete the installation of the doors, drawers, and trim pieces.
Completing any cabinet installation when remodeling a kitchen requires basic DIY skills and using the proper tools. If you are unsure about the tools that will be needed, then visit a home improvement store or research online. The key point to remember about installing any cabinetry is to ensure you have the base units and upper units level and plumb. If the units are not level and plumb, then the drawers or the doors may not shut properly. New appliances may also not fit correctly. One aspect to keep in mind for any cabinet installation is to have a helper available.
Remodeling a kitchen is a multiple-step process. You will need to have the rough wiring and plumbing completed before installing any cabinetry. This will prevent any need to address problems which could occur at a later time. However, the base cabinets need to be put in place before finishing the main floor in the kitchen. The goal is to prevent waste when the flooring is being installed.
Proper demolition is needed when remodeling the kitchen or a residential home. This means taking the proper care and effort to carefully remove the old cabinets. The goal is to limit any damage to the walls to prevent any unnecessary repairs. Another thing to keep in mind is the walls need to be measured for the new cabinets.
Securing the cabinets to the existing walls will be done using nails or screws. If there are any screws or nails in the walls after taking off the old cabinets, then they need to be removed. Check to make ensure all the parts and pieces of the cabinets are present before starting the installation process. Many cabinet units will come disassembled from the manufacturer. The base cabinets need to be set into place on the floor and against the wall. You may need to use shims to level the units on the floor.
Securing the cabinets to the walls requires using screws with a power drill. The power drill will need to be used to drive the screws into the back of the cabinets and into the wall studs. Place the other units of the cabinets together and secure them to the wall.